HP 6125XLG Command Reference Manual page 48

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
user-defined: Displays user-defined traffic behaviors.
behavior-name: Behavior name, a case-sensitive string of 1 to 31 characters. If no traffic behavior name
is specified, this command displays information about all the user-defined traffic behaviors.
Examples
# Display information about user-defined traffic behaviors.
<Sysname> display traffic behavior user-defined
User Defined Behavior Information:
Behavior: 1 (ID 100)
Marking:
Remark dscp 3
Committed Access Rate:
CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action: pass
Yellow action: pass
Red action: discard
Behavior: 2 (ID 101)
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dot1p 1
Behavior: 3 (ID 102)
-none-
Table 18 Command output
Field
Behavior
Marking
Remark dscp
Committed Access Rate
Green action
Yellow action
Red action
Accounting enable
Filter enable
Description
Name and contents of a traffic behavior.
Information about priority marking.
Action of setting the DSCP value for packets.
Information about the CAR action.
Action to take on green packets.
Action to take on yellow packets.
Action to take on red packets.
Traffic accounting action.
Traffic filtering action.
43