HP 6125XLG Command Reference Manual page 12

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. VLAN
interfaces are not supported. If no interface is specified, the command displays ACL application
information on all interfaces except VLAN interfaces for packet filtering.
interface vlan-interface vlan-interface-number: Specifies a VLAN interface by its number.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
slot slot-number: Specifies an IRF member device. The slot-number argument represents the ID of the IRF
member device. If no IRF member device is specified, the command displays ACL application information
for packet filtering on the master.
Usage guidelines
If you specify neither the inbound keyword nor the outbound keyword, the command displays the ACL
application information for both incoming and outgoing packet filtering.
Examples
# Display ACL application information for incoming packet filtering on interface FortyGigE 1/1/1.
<Sysname> display packet-filter interface FortyGigE 1/1/1
Interface: FortyGigE1/1/1
In-bound policy:
ACL 2001, Hardware-count
Default action: Deny
Out-bound policy:
ACL 2005
Default action: Deny
Table 2 Command output
Field
Interface
In-bound policy
Out-bound policy
ACL 2001
Hardware-count
Default action
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
Successfully enables counting ACL rule matches.
Default action for packet filtering, namely, the action to take on
packets that do not match the ACL. Deny means to drop the packets.
If the default action is to permit the packets to pass through, the field
is not displayed.
7