GTS and rate limit commands
GTS commands
display qos gts interface
Use display qos gts interface to view generic traffic shaping (GTS) configuration and statistics on a
specified interface or all the interfaces.
Syntax
display qos gts interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the GTS configuration and statistics on all the interfaces.
Examples
# Display the GTS configuration and statistics on all the interfaces.
<Sysname> display qos gts interface
Interface : Ten-GigabitEthernet1/1/5
Rule(s): If-match queue 1
CIR 12800 (kbps), CBS 512000 (Bytes)
Rule(s): If-match queue 2
CIR 25600 (kbps), CBS 1024000 (Bytes)
Table 28 Command output
Field
Interface
Rule(s)
CIR
CBS
qos gts
Use qos gts to set GTS parameters for traffic of a specific queue on an interface.
Use undo qos gts to remove GTS parameters for traffic of a specific queue on an interface.
Description
Interface type and interface number.
Match criteria.
CIR in kbps.
CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.
71