[Sysname-behavior-database] redirect interface ten-gigabitethernet1/1/5
Related commands
•
classifier behavior
qos policy
•
•
traffic behavior
remark customer-vlan-id
Use remark customer-vlan-id to add a CVLAN marking action to a traffic behavior.
Use undo remark customer-vlan-id to remove the action from the traffic behavior.
Syntax
remark customer-vlan-id vlan-id
undo remark customer-vlan-id
Default
No CVLAN marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a CVLAN ID in the range of 1 to 4094.
Examples
# Configure traffic behavior b1 to mark matching packets with CVLAN 1 1 1.
<Sysname> system-view
[Sysname] traffic behavior b1
[Sysname-behavior-b1] remark customer-vlan-id 111
remark dot1p
Use remark dot1p to configure an 802.1p priority marking action or an inner-to-outer tag priority
copying action.
Use undo remark dot1p to delete the action.
Syntax
remark { [ green | red | yellow ] dot1p dot1p-value | dot1p customer-dot1p-trust }
undo remark [ green | red | yellow ] dot1p
Default
No 802.1p priority marking action or inner-to-outer tag priority copying action is configured.
Views
Traffic behavior view
46