Wrr Commands; Display Qos Wrr Interface - HP 6125XLG Command Reference Manual

undo qos sp
Default
An interface uses the WRR queuing algorithm.
Views
Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable SP queuing on Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] qos sp
Related commands
display qos sp interface

WRR commands

display qos wrr interface

Use display qos wrr interface to display the WRR queuing configuration on an interface.
Syntax
display qos wrr interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the WRR queuing configuration of all the interfaces.
Examples
# Display the WRR queuing configuration of Ten-GigabitEthernet 1/1/5.
<Sysname> display qos wrr interface ten-gigabitethernet 1/1/5
Interface: Ten-GigabitEthernet1/1/5
Output queue: Weighted Round Robin queuing
Queue ID
-----------------------------------------
be
af1
af2
Group Weight
sp NA
1 2
1 3
76