[Device] local-user 00-e0-fc-12-34-56 class network
[Device-luser-network-00-e0-fc-12-34-56] password simple 00-e0-fc-12-34-56
[Device-luser-network-00-e0-fc-12-34-56] service-type lan-access
[Device-luser-network-00-e0-fc-12-34-56] quit
# Configure ISP domain aabbcc to perform local authentication for LAN users.
[Device] domain aabbcc
[Device-isp-aabbcc] authentication lan-access local
[Device-isp-aabbcc] quit
# Enable MAC authentication globally.
[Device] mac-authentication
# Enable MAC authentication on port Ten-GigabitEthernet 1/1/5.
[Device] interface ten-gigabitethernet 1/1/5
[Device-Ten-GigabitEthernet1/1/5] mac-authentication
[Device-Ten-GigabitEthernet1/1/5] quit
# Specify the MAC authentication domain as the ISP domain aabbcc.
[Device] mac-authentication domain aabbcc
# Configure MAC authentication timers.
[Device] mac-authentication timer offline-detect 180
[Device] mac-authentication timer quiet 180
# Configure MAC authentication to use MAC-based accounts. The MAC address usernames and
passwords are hyphenated and in lower case.
[Device] mac-authentication user-name-format mac-address with-hyphen lowercase
Verifying the configuration
# Display MAC authentication settings and statistics.
<Device> display mac-authentication
MAC authentication is enabled
User name format is MAC address in lowercase, like xx-xx-xx-xx-xx-xx
Fixed username: mac
Fixed password: Not configured
Silent MAC user info:
Ten-GigabitEthernet1/1/5 is link-up
MAC authentication is enabled
Max number of online users is 256
Current number of online users is 1
Current authentication domain: Not configured
Offline detect period is 180s
Quiet period is 180s
Server response timeout value is 100s
Max number of users is 1024 per slot
Current number of online users is 1
Current authentication domain is aabbcc
MAC Addr
VLAN ID
From Port
83
Port Index