Terminating The Connection With The Sftp Server; Configuring The Device As An Scp Client - HP 6125XLG Configuration Manual

Task
Display the help information of an
SFTP client command.

Terminating the connection with the SFTP server

Task
Terminate the connection with the
SFTP server and return to user view.

Configuring the device as an SCP client

This section describes how to configure the device as an SCP client and transfer files with an SCP server.
When an SCP client accesses an SCP server, it uses the locally saved host public key of the server to
authenticate the server. When acting as an SCP client, the device supports the first authentication by
default. When the device accesses an SCP server for the first time but it is not configured with the host
public key of the SCP server, it can access the server and locally save the server's host public key for
future use. In a secure network, the first authentication can simplify the configuration on the SFTP client,
but it is not reliable.
To transfer files with an SCP server:
Command
•
help
•
?
Command
•
bye
•
exit
•
quit
138
Remarks
Use either command.
Available in SFTP client view.
These two commands function in
the same way.
Remarks
Use one of the commands.
Available in SFTP client view.
These three commands function in the
same way.