Verifying The Configuration - HP 6125XLG Configuration Manual

[Device] dot1x authentication-method chap
3. Configure port security:
# Enable port security.
[Device] port-security enable
# Add five OUI values. (You can add up to 16 OUI values. The port permits only one user
matching one of the OUIs to pass authentication.)
[Device] port-security oui index 1 mac-address 1234-0100-1111
[Device] port-security oui index 2 mac-address 1234-0200-1111
[Device] port-security oui index 3 mac-address 1234-0300-1111
[Device] port-security oui index 4 mac-address 1234-0400-1111
[Device] port-security oui index 5 mac-address 1234-0500-1111
# Set the port security mode to userLoginWithOUI.
[Device] interface ten-gigabitethernet 1/1/5
[Device-Ten-GigabitEthernet1/1/5] port-security port-mode userlogin-withoui
[Device-Ten-GigabitEthernet1/1/5] quit

Verifying the configuration

# Display the RADIUS scheme radsun.
[Device] display radius scheme radsun
RADIUS Scheme Name
Index : 0
Primary Auth Server:
IP : 192.168.1.2
VPN : Not configured
Primary Acct Server:
IP : 192.168.1.3
VPN : Not configured
Second Auth Server:
IP : 192.168.1.3
VPN : Not configured
Second Acct Server:
IP : 192.168.1.2
VPN : Not configured
Accounting-On function
retransmission times
retransmission interval(seconds)
Timeout Interval(seconds)
Retransmission Times
Retransmission Times for Accounting Update : 5
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes)
NAS IP Address
VPN
User Name Format
# Display the configuration of the ISP domain sun.
: radsun
99
Port: 1812
Port: 1813
Port: 1812
Port: 1813
: Disabled
: 50
: 3
: 5
: 5
: 5
: 15
: Not configured
: Not configured
: without-domain
State: Active
State: Active
State: Active
State: Active