HP 6125XLG Configuration Manual page 42

Blade switch security configuration guide
Table of Contents

Advertisement

Step
3.
Specify HWTACACS
accounting servers.
Specifying the shared keys for secure HWTACACS communication
The HWTACACS client and server use the MD5 algorithm and shared keys to generate the Authenticator
value for packet authentication and user password encryption. They must use the same key for each type
of communication
To specify a shared key for secure HWTACACS communication:
Step
1.
Enter system view.
2.
Enter HWTACACS scheme
view.
3.
Specify a shared key for
secure HWTACACS
authentication, authorization,
or accounting
communication.
Specifying a VPN for the scheme
The VPN specified for an HWTACACS scheme applies to all servers in that scheme. If a VPN is also
configured for an individual HWTACACS server, the VPN specified for the HWTACACS scheme does
not take effect on that server.
To specify a VPN for an HWTACACS scheme:
Step
1.
Enter system view.
2.
Enter HWTACACS scheme
view.
3.
Specify a VPN for the
HWTACACS scheme.
Command
Specify the primary HWTACACS
accounting server:
primary accounting { ipv4-address |
ipv6 ipv6-address } [ port-number |
key { cipher | simple } string |
vpn-instance vpn-instance-name ] *
Specify a secondary HWTACACS
accounting server:
secondary accounting
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
key { accounting | authentication |
authorization } { cipher | simple }
string
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
vpn-instance vpn-instance-name
33
Remarks
Configure at least one command.
By default, no accounting server is
specified.
Two HWTACACS accounting
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.
Remarks
N/A
N/A
By default, no shared key is
specified.
The shared key configured on the
device must be the same as that
configured on the HWTACACS
server.
Remarks
N/A
N/A
By default, an HWTACACS
scheme belongs to the public
network.

Advertisement

Table of Contents
loading

Table of Contents