Displaying And Maintaining Password Control; Password Control Configuration Example - HP 6125XLG Configuration Manual

Displaying and maintaining password control

Execute display commands in any view and reset commands in user view.
Task
Display password control configuration.
Display information about users in the
password control blacklist.
Delete users from the password control
blacklist.
Clear history password records.
NOTE:
The reset password-control history-record command can delete the history password records of one or
all users even when the password history function is disabled.

Password control configuration example

Unless otherwise noted, devices in the configuration example are operating in non-FIPS mode.
Network requirements
Configure a global password control policy to meet the following requirements:
An FTP or VTY user failing to provide the correct password in two successive login attempts is
•
permanently prohibited from logging in.
• A user can log in 5 times within 60 days after the password expires.
A password must contain at least 16 characters.
•
A password expires after 30 days.
•
The minimum password update interval is 36 hours.
•
The maximum account idle time is 30 days.
•
• A password cannot contain the username or the reverse of the username.
No character appears consecutively three or more times in a password.
•
A password must contain at least four character types and at least four characters for each type.
•
Configure a super password control policy for user role network-operator to meet the following
requirements:
A super password must contain at least 24 characters.
•
• A super password must contain at least four character types and at least five characters for each
type.
Configure a password control policy for the local Telnet user test to meet the following requirements:
• The password must contain at least 24 characters.
The password must contain at least four character types and at least five characters for each type.
•
The password for the local user expires after 20 days.
•
Command
display password-control [ super ]
display password-control blacklist [ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
reset password-control blacklist [ user-name name ]
reset password-control history-record [ user-name name |
super [ role role name ] ]
112