Download Print this page

HP 6125XLG Configuration Manual: Displaying And Maintaining Mac Authentication; Local Mac Authentication Configuration Example; Network Requirements; Configuration Procedure

R2306-hp 6125xlg blade switch security configuration guide.
Hide thumbs

Advertisement

Step
1.
Enter system view.
2.
Enter interface view.
3.
Set the maximum number of
concurrent MAC authentication
users on the port

Displaying and maintaining MAC authentication

Execute display commands in any view and reset commands in user view.
Task
Display MAC authentication information.
Clear MAC authentication statistics.
Local MAC authentication configuration example
Network requirements
As shown in
control Internet access, as follows:
Configure the device to detect whether a user has gone offline every 180 seconds, and if a user fails
authentication, deny the user for 180 seconds.
Configure all users to belong to the ISP domain aabbcc, and specify local authentication for users
in the domain.
Use the MAC address of each user as the username and password for authentication, and require
the MAC addresses be hyphenated and in lower case.
Figure 33 Network diagram
Configuration procedure
# Add a network access local user, configure both the username and password as the host's MAC
address 00-e0-fc- 1 2-34-56, and specify the LAN access service for the account.
<Device> system-view
Figure
33, configure local MAC authentication on port Ten-GigabitEthernet 1/1/5 to
Command
system-view
interface interface-type
interface-number
mac-authentication max-user
user-number
Command
display mac-authentication [ interface interface-type
interface-number ]
reset mac-authentication statistics [ interface interface-type
interface-number ]
82
Remarks
N/A
N/A
By default, the maximum number
of concurrent MAC
authentication users is 256.

Advertisement

Troubleshooting

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: