HP 6125XLG Configuration Manual page 41

Specifying the HWTACACS authorization servers
You can specify one primary authorization server and up to 16 secondary authorization servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If no redundancy is needed, specify only the primary server. An HWTACACS server can
function as the primary authorization server of one scheme and as the secondary authorization server of
another scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Specifying the HWTACACS accounting servers
You can specify one primary accounting server and up to 16 secondary accounting servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If no redundancy is needed, specify only the primary server. An HWTACACS server can
function as the primary accounting server of one scheme and as the secondary accounting server of
another scheme at the same time.
HWTACACS does not support accounting for FTP users.
To specify HWTACACS accounting servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
32
Remarks
N/A
N/A
Configure at least one command.
By default, no authorization server
is specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.
Remarks
N/A
N/A