Configuring Aaa Schemes; Configuring Local Users - HP 6125XLG Configuration Manual

Tasks at a glance
(Required.) Perform at least one of the following tasks to configure local users or AAA schemes:
•

Configuring local users

•
Configuring RADIUS schemes
•
Configuring HWTACACS schemes
•
Configuring LDAP schemes
(Required.) Configure AAA methods for ISP domains:
1. (Required.)
2. (Optional.)
3. (Required.) Perform at least one of the following tasks to configure AAA authentication, authorization, and
accounting methods for the ISP domain:
Configuring authentication methods for an ISP domain
Configuring authorization methods for an ISP domain
Configuring accounting methods for an ISP domain
(Optional.)

Configuring AAA schemes

This section includes information on configuring local users, RADIUS schemes, HWTACACS schemes,
and LDAP schemes.
Configuring local users
To implement local authentication, authorization, and accounting, create local users and configure user
attributes on the device. The local users and attributes are stored in the local user database on the device.
A local user is uniquely identified by the combination of a username and a user type. Local users are
classified into the following types:
Device management user—User who logs in to the device for device management.
•
Network access user—User who accesses network resources through the device.
•
Configurable local user attributes are:
Service type.
•
Services that the user can use. Local authentication checks the service types of a local user. If none
of the service types is available, the user cannot pass authentication.
Service types include FTP, LAN access, SSH, Telnet, and terminal.
User state.
•
Whether or not a local user can request network services. There are two user states: active and
blocked. A user in active state can request network services, but a user in blocked state cannot.
User group.
•
Each local user belongs to a local user group and bears all attributes of the group, such as the
password control attributes and authorization attributes. For more information about local user
group, see
Binding attributes.
•
Creating an ISP domain
Configuring ISP domain status
Enabling the session-control feature
"Configuring user group attributes."
18