Download Print this page

HP 6125XLG Configuration Manual: Verifying The Configuration

R2306-hp 6125xlg blade switch security configuration guide.
Hide thumbs

Advertisement

# Set port security's limit on the number of MAC addresses to 64 on the port.
[Device] interface ten-gigabitethernet 1/1/5
[Device-Ten-GigabitEthernet1/1/5] port-security max-mac-count 64
# Set the port security mode to macAddressElseUserLoginSecure.
[Device-Ten-GigabitEthernet1/1/5]port-security port-mode mac-else-userlogin-secure
# Set the NTK mode of the port to ntkonly.
[Device-Ten-GigabitEthernet1/1/5] port-security ntk-mode ntkonly
[Device-Ten-GigabitEthernet1/1/5] quit

Verifying the configuration

# Display the port security configuration.
[Device] display port-security interface ten-gigabitethernet 1/1/5
Port security is enabled globally
AutoLearn aging time is 0 minutes
Disableport Timeout: 20s
OUI value:
Ten-GigabitEthernet1/1/5 is link-up
Port mode: macAddressElseUserLoginSecure
NeedToKnow mode: NeedToKnowOnly
Intrusion protection mode: NoAction
Max number of secure MAC addresses: 64
Current number of secure MAC addresses: 0
Authorization is permitted
After users pass authentication, you can use the following commands to display the user authentication
information on the port:
# Display MAC authentication information.
[Device] display mac-authentication interface ten-gigabitethernet 1/1/5
MAC address authentication is enabled
User name format is fixed account
Fixed username: aaa
Fixed password: ******
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
Max number of users is 1024 per slot
Current number of online users is 3
Current authentication domain is sun
Silent MAC user info:
Ten-GigabitEthernet1/1/5 is link-up
MAC address authentication is enabled
Max number of online users is 256
Current number of online users is 3
MAC Addr
From Port
102
Port Index

Advertisement

Troubleshooting

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: