Password Not Displayed In Any Form; Logging; Fips Compliance; Password Control Configuration Task List - HP 6125XLG Configuration Manual

Blade switch security configuration guide
Table of Contents

Advertisement

Password not displayed in any form

For security purposes, nothing is displayed when a user enters a password.

Logging

The system logs all successful password changing events and user adding events to the password control
blacklist.

FIPS compliance

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode (see

Password control configuration task list

The password control functions can be configured in several different views, and different views support
different functions. The settings configured in different views or for different objects have the following
application ranges:
Settings for super passwords apply to only super passwords.
Settings in local user view apply to only the password of the local user.
Settings in user group view apply to the passwords of the local users in the user group if you do not
configure password policies for these users in local user view.
Global settings in system view apply to the passwords of the local users in all user groups if you do
not configure password policies for these users in both local user view and user group view.
For local user passwords, the settings with a smaller application scope have higher priority.
To configure password control, perform the following tasks:
Tasks at a glance
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Enabling password control

To successfully enable the global password control feature and log in to the device, the device must have
sufficient storage space.
Enabling the global password control feature is the prerequisite for all password control configurations
to take effect. Then, for a specific password control function to take effect, enable this password control
function.
Enabling password control
Setting global password control parameters
Setting user group password control parameters
Setting local user password control parameters
Setting super password control parameters
"Configuring
108
FIPS") and non-FIPS mode.

Advertisement

Table of Contents
loading

Table of Contents