Table of Contents
Advertisement
Connections
To select the tuner option :
a. Press the STAR key on the RCU to activate the tuner mode
b. With the local keypad :
- Press ADJUST key to display the GENERAL ACCESS menu on the screen.
- Use the control keys to highlight 'TUNER'.
- Press ENTER to activate the tuner mode.
Peripheral equipment
Connecting a RCVDS 05 switcher to the projector
-
Up to 10 inputs (20 inputs when video and S-Video) with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS
switchers are linked via the expansion modules.
-
Serial communication with the projector.
-
Remote control buttons on the RCVDS to control the projector (source selection and analog settings).
-
The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with
a LED on the rear.
For more information about the use of the RCVDS 05, consult the Owner's Manual, order No. R5975765.
Connecting a VS05 switcher to the projector
The VS05 can switch up to 5 Composite Video sources, 3 S-Video sources and 1 RGB analog or component video source to
the projector. In addition, the audio signal from the source can be switched to an audio amplifier.
For more information about the use of the VS05, consult the Owner's Manual, Order No. R5975245.
Connecting an IR Remote Receiver to the Projector
This infra-red receiver makes it possible to control the projector from another room. There is a communication cable between the
IR receiver and the projector or the RCVDS. The infrared control information from the RCU is sent to the IR Remote Receiver. The
IR Remote Receiver 800 displays the selected source on a 7-segment display.
3 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5
OR
GENERAL ACCESS
SHARPNESS
5
6
3
4
1
2
BRIGHTNESS
TUNER
CONTRAST
Enter ADJUST
Select with
then <ENTER>
<EXIT> to return
Order No. R9827890.
Order No. R9827515.
TINT
COLOR
or
Advertisement
Table of Contents
