Table of Contents
Advertisement
10.7 BARCO logo
The BARCO logo can be added to the image, in overlay or on a background, on any place on the
screen.
To add the BARCO logo or to change a setting in the
! Push the cursor key
! Press
to display the
ENTER
Within this menu, three toggle settings and a shift control are available.
STATUS [ON/OFF]
BACKGROUND [ON/OFF]
SHIFT
HOT KEY [TEXT/OFF]
R5976255 A
CS4 (2001-03)
TLAS
or
to highlight
up
down
BARCO logo menu
: BARCO logo will be displayed on the screen.
ON
: No BARCO logo displayed on the screen.
OFF
: BARCO logo will be displayed on a black background.
ON
: BARCO logo will be displayed without any back-
OFF
ground.
By pushing the cursor key
BARCO logo can be positioned anywhere on the screen.
: no key on the
OFF
: the
TEXT
move the BARCO logo with one single push on this key
(only in operational mode)..
BARCO logo menu
.
'BARCO logo'
. The actual settings will be displayed.
,
up
is used to display the BARCO logo
RCU
key on the
TEXT
RCU
:
,
or
, the-
down
left
right
is used to display or to re-
10-8
Advertisement
Table of Contents
