Table of Contents
Advertisement
3G8WV-TS
32
5.3.4
WiFi Protected Setup (WPS)
WPS is the simplest way to establish a connection between wireless clients and your Smart Hub. This method
removes the need to manually select the encryption mode and fill in the PassPhrase. You only need to press a
button on both wireless client and the Smart Hub, and the WPS will do the rest for you. The Smart Hub supports
two types of WPS:
WPS via Push Button – you have to push a specific button on the wireless client or in your wireless client utility
to start the WPS mode. Then switch the Smart Hub to WPS mode. You can simply push the WPS button of the
wireless router, or click the 'Start to Process' button in the web configuration interface.
WPS via PIN code – you have to know the PIN code of the wireless client and switch it to WPS mode, then input
the wireless client PIN to the Smart Hub web interface.
The Smart Hub's WPS settings can be viewed and configured by selecting the "WPS" menu item under the
"Wireless Settings" tab in the Advanced View of the Management Console.
WPS
Use the drop box to either enable or disable the WPS function.
WPS Current
If the wireless security (encryption) function of this wireless router is properly set, you will
Status
see a 'Success' message here. Otherwise, you will see 'Idle'.
WPS SSID
This is the network broadcast name (SSID) of the router.
WPS Auth Mode
It shows the active authentication mode for the wireless connection.
WPS PIN
This is the WPS PIN code of the wireless router. You may need this information when
connecting to other WPS-enabled wireless devices.
WPS Mode
Select either PIN mode or PBC (which is the WPA via Push Button).
5.3.5
Station List
The Station List shows the wireless devices currently associated with your Smart Hub. The wireless clients
connected to your Smart Hub are shown by selecting the "Station List" menu item under the "Wireless Settings"
tab in the Advanced View of the Management Console.
www.netcommlimited.com
Advertisement
Table of Contents
