Table of Contents
Advertisement
www.netcommlimited.com
5.4
Firewall
5.4.1
MAC/IP/Port Filtering
This page allows you to setup MAC, IP and port filtering rules to protect your network from malicious activity. The
filtering rules can be used to either allow or block certain users and/or ports from accessing the Internet. The
Smart Hub's MAC/IP/Port Filtering settings can be viewed and configured by selecting the "MAC/IP/Port Filtering"
menu item under the "Firewall" tab in the Advanced View of the Management Console.
5.4.1.1
Basic Settings
MAC/IP/Port Filtering: Select Enable to enable MAC/IP/Port Filtering
Default Policy: Select whether packets that do not match any rules are accepted or dropped
5.4.1.2
MAC/IP/Port Filtering Settings
MAC Address: MAC address of a local computer
Dest IP Address: Destination IP Address for the filter rule
Source IP Address: Source IP Address for the filter rule
Protocol: Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it to the default
"TCP&UDP" setting
Dest Port Range: Destination Port Range of the filter rule
Source Port Range: Source Port Range of the filter rule
Action: Either accept or drop the packet that matches the rule
Comment: Add a comment to identify the rule (optional)
Click 'Apply' to save the settings.
Telus smart Hub
3G8WV-TS
33
Advertisement
Table of Contents
