Table of Contents
Advertisement
3G8WV-TS
34
5.4.2
Port Forwarding
This page allows you to configure port forwarding rules to allow remote users to access services such as Web
(HTTP) or FTP on your local computers. This allows you to redirect a particular port number (from the Internet/WAN
port) to a particular LAN IP address. Port forwarding can be viewed and configured on the Smart Hub by selecting
the "Port Forwarding" menu item under the "Firewall" tab in the Advanced View of the Management Console.
Virtual Server Settings: Enable/Disable port forwarding.
IP Address: The LAN IP address that the public port number packet will be sent to.
Port Range: The public port numbers to be sent to the specific LAN IP address.
Protocol: Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it as the default
"TCP&UDP" setting
Comment: Add a comment to identify the rule (optional)
Click' Apply' to save the settings.
www.netcommlimited.com
Advertisement
Table of Contents
