Table of Contents
Advertisement
www.netcommlimited.com
The 3G Operation mode can be configured on this page. This allows for automatic failover to be configured if
desired. Please see the table below for options allowed for the 3G operation mode:
'Always ON'
Enables the 3G internet connection and, does not disconnect, even if idle.
'OFF'
The Smart Hub will not connect to the Internet
'Automatic 3G
The Automatic 3G Backup feature of the Smart Hub is designed to provide a backup 3G
Backup'
Internet connection when you use the WAN connection as your primary, when the primary
fails.
The Internet connection will automatically switch back to your WAN connection once your
WAN Internet connection is back online.
To use this feature, you will need both an Ethernet WAN connection (from an xDSL
modem/ISDN/Satellite etc) and a 3G connection.
To configure your WAN settings according to your network environment, please switch to
advanced view
"Internet Settings" "WAN". Click "Save and apply settings" to finish.
Telus smart Hub
3G8WV-TS
15
Advertisement
Table of Contents
