Table of Contents
Advertisement
[Multicast] Settings
You can set the individual IP address and multicast
port for video images and audio received via
multicast.
This page can be used during access using
"admin" or "operator".
When the Control Menu is open, click [Viewer
0
Setup] to switch to the Viewer Setup Menu.
Click [Multicast], followed by clicking [Video] or
0
[Audio] to open the setting screen.
When you click the [Apply] button, the current
0
settings are made valid on the viewer and they
are stored in the computer.
Video
.
Multicast IP Address
You can change the multicast IP address.
[Factory default: 225.0.1.1]
Multicast Port
You can change the multicast port number.
[Factory default: 49152]
[Viewer Setup] - [Multicast] Settings
100
Memo :
Set the multicast IP address and multicast port
0
to the same value specified for the destination
address and destination port respectively in the
[Multicast] page.
(A p.77 [[Multicast] Page] )
Audio
.
Multicast IP Address
You can change the multicast IP address.
[Factory default: 225.0.3.1]
Multicast Port
You can change the multicast port number.
[Factory default: 39152]
Memo :
Set the multicast IP address and multicast port
0
to the same value specified for the destination
address and destination port respectively in the
[Multicast] page.
(A p.77 [[Multicast] Page] )
Advertisement
Table of Contents
