Table of Contents
Advertisement
H Heater ON/OFF switch
This is the ON/OFF switch of the built-in heater.
It is intended for use when the camera is
installed or used in an environment with low
temperature. When installing the heater at an
unrequired location, turn OFF the switch of the
heater. When it is set to ON, the heater will be
automatically controlled to adjust the internal
temperature to an appropriate level. It is usually
set to ON.
(A p.32 [Installation and Connection
Preparations (VN-H657WPBU)] )
I microSD card slot
Insert a microSD card.
(A p.33 [Insert a microSD card.
(VN-H657WPBU)] )
J microSD cover
K Dome cover fixing screws (x4)
L Dome cover
The dome cover is a delicate object. Handle it
with care.
Note :
It is covered with a protective sheet during
0
shipment. Do not remove this sheet until
installation is complete.
M [MAC address] indication
The MAC address is a unique physical address
of the product. This address cannot be altered.
N Camera unit
O Lens unit (camera module)
You cannot replace the lens alone.
Name of Parts
17
Advertisement
Table of Contents
