Built-in Viewer Screen
Configuration
Memo :
Built-in Viewer settings are stored in cookies.
0
From this Settings screen, you can set up the
0
Built-in Viewer as the software on the computer.
You cannot set up camera operations from this
screen.
For the latest firmware version, please visit our
0
website.
(The latest firmware version can be found on the
Download page of V.NETWORKS.)
http://www3.jvckenwood.com/english/
products-e.html
Note :
If you delete the cookies, the current viewer
0
settings are deleted. The next time when you
start the Built-in Viewer, the viewer will operate
in the initialized state.
.
* Setting values with R are default values.
MENU OFF/MENU ON
Displays or hides the operation menu.
Click [MENU ON], and the operation menu will
appear on the left of the page.
Control
Switches the Operation Menu to the Control Menu.
Click this button to adjust the [Image Settings],
[PTZ Settings] or [PTZ Control] settings.
(A p.92 [[Image Settings] Settings] )
(A p.94 [ [PTZ Settings] ] )
(A p.97 [ [PTZ Control] ] )
Built-in Viewer Screen Configuration
90
Viewer Setup
Switches the Operation Menu to the Viewer Setup
Menu.
Click this when you want to set [Unicast],
[Multicast], [On Screen Display], [Audio Monitor],
[Other], or play back videos on the [microSD card].
(A p.99 [[Unicast] Settings] )
(A p.100 [[Multicast] Settings] )
(A p.101 [[On Screen Display] Settings] )
(A p.102 [[Audio Monitor] Settings] )
(A p.103 [[Other] Settings] )
(A p.104 [[microSD Card] Operation Screen] )
Stop/Play
Pauses or plays back images.
Capture
Captures the currently displayed image in your
computer. The image is recorded as a JPEG file in
the folder that is created under the [Document]
folder of the computer.
The default folder name is "model name". (For
example, the folder name is "VN-H657WPB" in the
case of VN-H657WPBU.)
The file name is made up of "year, month, day,
hour, minute, second, and millisecond".
Memo :
You can rename the folder in the [Other]
0
settings.
(A p.103 [[Other] Settings] )
Note :
The clock time of this file name is the clock time
0
of the computer. Note that it is not the "Time" of
the camera.
You cannot capture images as videos.
0
You cannot save H.264 images.
0
Speech
Clicking this button sends audio sound to the
0
camera from the microphone that is connected
to the computer.
Audio is output from the camera.
If this button is not clicked, audio sound from the
0
microphone connected to the camera via the
audio cable is output from the speaker of the
computer.
The color of the button changes to orange during
0
audio transmission.
When [Communicate] on the [Audio] page is set
0
to "Half Duplex", audio from the camera's
microphone is not output from the computer
while audio transmission to the camera is in
progress.