Table of Contents
Advertisement
JPEG Attachment:
0
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
Encoder:
0
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
You cannot select [JPEG Attachment] if there is
0
no channel with Encode set to JPEG.
By using [JPEG Attachment], images recorded
0
immediately before and/or after the trigger are
attached. In the event that the action of a trigger
takes time, the image you want may not be
included in the attachment.
For example, even when "Day/Night" is selected
as the trigger condition and set to "Color", a
black-and-white image may be attached instead
of a colored one.
TCP
TCP IP Address:
0
Enter the IP address or FQDN of the destination
of TCP notification.
TCP Port Number:
0
Enter the port number of the destination of TCP
notification. (1 to 65535)
TCP Data:
0
Enter a character string to be sent for TCP
notification. Input not more than 127 characters.
JPEG Attachment:
0
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
Encoder:
0
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
You cannot select [JPEG Attachment] if there is
0
no channel with Encode set to JPEG.
By using [JPEG Attachment], images recorded
0
immediately before and/or after the trigger are
attached. In the event that the action of a trigger
takes time, the image you want may not be
included in the attachment.
For example, even when "Day/Night" is selected
as the trigger condition and set to "Color", a
black-and-white image may be attached instead
of a colored one.
[Advanced Settings] Page - [Alarm] Page
58
UDP
UDP IP Address:
0
Enter the IP address or FQDN of the destination
of UDP notification.
UDP Port Number:
0
Enter the port number of the destination of UDP
notification. (1 to 65535)
UDP Data:
0
Enter a character string to be sent for UDP
notification. Input not more than 127 characters.
Switch Scene File
Scene File:
0
Select the scene file to change. For details of the
scene file, see the [Camera] page.
(A p.48 [[Camera] Page] )
[Set values: RGeneral, Indoor, Outdoor,
ActiveGamma, Traffic, DataSaving, Day(Color),
Night(B&W)]
Action Position Number
Set the position number to move to when [Action]
item is set to "Position".
[Set values: 0 to 99]
Memo :
Specify the setting for Preset Position in [PTZ
0
Settings] of Built-in Viewer.
(A p.94 [ [PTZ Settings] ] )
Pin Output1 Make, Pin Output1 Break, Pin
Output2 Make, Pin Output2 Break
Alarm Output Duration:
0
Specify the output time when the [Action] item is
set to "Pin Output1 Make", "Pin Output1 Break",
"Pin Output2 Make", or "Pin Output2 Break".
[Set values: 0, 100 to 5000] msec
Play Audio
Audio File:
0
Select the file number to play when [Action] item
A is set to "Play Audio".
[Set values: 1 to 5]
Advertisement
Table of Contents
