Table of Contents
Advertisement
Return Time
This item sets the time to return the operation with
Auto Return.
[Set values: R1, 2, 3, 5, 10, 20, 30, 60] minutes
Test
Click [Execute] to test run the configured Auto
Return operation.
Limit
EZoom Limit
When the zoom lens is operated to TELE side,
optical zoom works and electronic zoom works
after optical zoom becomes full. This item sets the
maximum value of the electronic zoom function.
[Set values: 1, R2, 4, 8, 10]
Memo :
As electronic zoom processes the images
0
digitally, image quality will deteriorate slightly
Increasing the electronic zoom ratio will shift the
0
center of the screen toward the top left. This is a
characteristic of this camera and is not a
malfunction.
During continuous zoom operation, there is a
0
one-second pause when the electronic zoom
switches to optical zoom. This is intended to
mark the boundary between electronic and
optical zoom, and is not a malfunction.
Pan Limit
This item sets the movable range of the pan
(horizontal) operation during manual operation
when "ON" is selected. It is invalid when "OFF" is
selected.
[Set values: ON, ROFF]
[Set Left], [Set Right]:
0
Click these buttons to set the current position to
the left or right edge.
[Go to Left], [Go to Right]:
0
Click these buttons to move the camera to the
preset left or right edge.
Memo :
It does not affect the Preset Position, Auto Pan,
0
Auto Trace, and Auto Flip operations.
Basic operation of Pan Limit
When [Pan Limit] is set to "ON", panning is only
available in the effective area.
When the camera is moved to prohibited area by
some operation that has priority over [Pan
Limit] and manual panning is performed, it
operates in the following manner.
Memo :
Panning can be operated freely even in the
0
prohibited area before the camera enters the
effective area.
Once the camera enters the effective area, the
0
[Pan Limit] settings take over and pan
operation can only be performed in the
effective area.
Operations that have priority over Pan Limit
The following operations are available
regardless of the prohibited areas set in [Pan
Limit].
Auto Pan
0
Auto Trace
0
Move Preset Position
0
Auto Flip
0
Settings that have priority over Pan Limit
The following setting comes together with pan
operation but they can be set regardless of the
prohibited areas even when [Pan Limit] is set to
"ON".
Privacy Mask Setting
0
Auto Pan setting
0
Memo :
When setting Preset Position with [Pan Limit]
0
set to "ON", panning operation is disabled in
the prohibited area.
As Move Preset Position has priority over
0
manual pan limit, setting the manual pan limit
after setting Preset Position does not prevent
Preset Position operation in the prohibited
area.
When setting Auto Trace and Preset Position
0
and the [Pan Limit] setting is "ON", panning is
unavailable in the prohibited area.
As Auto Trace and Move Preset Position have
0
priority over manual pan limit, setting pan limit
after setting Auto Trace or Preset Position
does not prevent Auto Trace or Preset
Position operation.
[Advanced Settings] Page -[PTZ] Page
67
Advertisement
Table of Contents
