[Multicast] Settings - JVC VN-H557U Instructions Manual

[Multicast] Settings

You can set the individual IP address and multicast
port for video images and audio received via
multicast.
This page can be used during access using
"admin" or "operator".
When the Control Menu is open, click [Viewer
0
Setup] to switch to the Viewer Setup Menu.
Click [Multicast], followed by clicking [Video] or
0
[Audio] to open the setting screen.
When you click the [Apply] button, the current
0
settings are made valid on the viewer and they
are stored in the computer.
Video
Multicast IP Address
You can change the multicast IP address.
[Factory default: 225.0.1.1]
Multicast Port
You can change the multicast port number.
[Factory default: 49152]
Memo :
Set the multicast IP address and multicast port
0
to the same value specified for the destination
address and destination port respectively in the
[Multicast] page.
(A p.58 [[Multicast] Page] )
Audio
Multicast IP Address
You can change the multicast IP address.
[Factory default: 225.0.3.1]
Multicast Port
You can change the multicast port number.
[Factory default: 39152]
Memo :
Set the multicast IP address and multicast port
0
to the same value specified for the destination
address and destination port respectively in the
[Multicast] page.
(A p.58 [[Multicast] Page] )
[Viewer Setup] -[Multicast] Settings
81