Table of Contents
Advertisement
4 Mount the dome cover to the camera.
A Check that the dome cover and lens are free
from dirt.
B Turn the dome cover in a clockwise direction to
mount.
.
Note :
The dome cover is an optical part. Handle with
0
care.
Prevent any dirt or foreign object from entering
0
when mounting the dome cover.
Tighten the dome cover securely.
0
Be sure to turn the dome cover until it stops and
0
tighten securely. Make sure that the dome cover
is not slanted.
Do not over-rotate the dome cover. This may
0
damage the dome cover.
Memo :
If it is difficult to screw on the dome cover, turn it
0
in an anticlockwise direction until you hear a
click sound, then turn it in a clockwise direction.
It will screw on smoothly.
5 Mount the fall prevention wire to the
camera (for connecting the ceiling
mount section to the camera).
Mount the fall prevention wire, which is
0
attached to the camera, to the fall prevention
wire fixing bracket of the ceiling mount
section.
Mounting the Camera (VN-H657BU)
30
0
0
6 Mount the camera and check the
camera lock knob.
0
0
Dome cover
0
Camera
D mark
(blue)
.
Note :
Before mounting the camera, check that the
0
camera fixing lock knobs are not locked (i.e.,
lock knobs are on top). The camera cannot be
mounted if the lock knobs are locked.
When pulling out the cables from the side,
0
remove the cable cover of the camera.
(A p.27 [Pulling out the cables from the side] )
Caution
The camera may fall if the fall prevention
wire is not connected. Be sure to connect
the fall prevention wire.
For safety purposes, do not leave the fall
prevention wire dangling by the camera.
Align the "D mark (blue)/(red)" inside the
camera with the "D mark (blue)/(red)" on the
ceiling mount section.
Mount the camera securely by inserting it
into the ceiling mount section until you hear
a click sound.
If the camera is mounted on securely, the
camera fixing lock knobs (x2) will stick out a
little.
Fall prevention wire
fixing bracket
6
5
D mark (red)
Fall-prevention
Wire on Camera
Check the knob.
During
mounting
After
mounting
Advertisement
Table of Contents
