Table of Contents
Advertisement
[IN] button:
0
Inputs the time of the video that is currently
playing automatically into the date/time entry
field. (upper)
[OUT] button:
0
Inputs the time of the video that is currently
playing automatically into the date/time entry
field. (lower)
[Export] button:
0
Pressing the button displays a confirmation
screen and saves the video.
While saving of the video is in progress, the
button switches to a [Cancel] button display.
Memo :
You cannot switch the Built-in Viewer screen
0
while saving of a video is in progress.
The time needed to save the video varies
0
according to the duration of the video. The
progress is shown at the top of the screen.
[Cancel] button:
0
Click the [Export] button to stop saving of the
video that is currently being output.
Data up to the point the button is pressed will
be created into a file.
Memo :
After output is stopped, the button switches to
0
the [Export] button display.
If the duration of the video to be stored on the
0
computer is short, the process may not stop
even if the button is pressed.
.
I Video display area
Displays recorded videos.
J Time stamp
Displays the date and time the currently playing
video is recorded. You can use E[Display
Time] to display or hide the time stamp.
Exiting Built-in Viewer
Click the [´] button at the right top corner of the
window to exit the viewer.
.
Memo :
When you start the Built-in Viewer the next time,
0
start up Internet Explorer and enter the URL of
the Built-in Viewer into the address bar.
For example, if the IP address of the camera is
192.168.0.2, enter the URL as follows:
http://192.168.0.2/
After the "Security Settings" screen appears,
0
press the [YES] button to proceed.
I
J
[Viewer Setup] -[microSD Card] Operation Screen
105
Advertisement
Table of Contents
