6Kp6-Rjssc Ports Single-Mode Fx-Sc-Type, "Snap-In; 6Kp6-Rjsscl Single-Mode Fx-Sc-Type, "Snap-In" Connector - GarrettCom Magnum 6K8 Hardware Installation And User's Manual

Industrial field switch magnum 6k8-series
Hide thumbs Also See for Magnum 6K8:
Table of Contents

Advertisement

Magnum 6K8-Series Industrial Field Switch
5.2.3
6KP6-RJSSC 4@
10/100Mbps RJ-45 Ports
and 2@100Mbps single-
mode FX-SC-type, "snap-
in" connector
The Magnum 6KP6-RJSSC is
also a Combo module
equipped with 4 dual speed
copper ports and 2 Single-
mode SC-type connectors. It
provides an advantage through combining copper and Fiber functions in one module of
the 6K8-Series Switch supporting four Copper and two single-mode fiber network
segments.
The 6KP6-RJSSC, when installed in a Magnum 6K8-Series Switch operates on
copper at the 100m distances. The Fiber is single-mode and cable lengths can be as
much as 25+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and a
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The
10/100 LED indicates 100Mbps speed when lit and at 10Mbps speed when off. To
distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label
"Sgl. M." is at the top of the faceplate of the 6K6-RJSSC.
5.2.4
6KP6-RJSSCL 4 @ 10/100 MB copper port and 2@100Mbps
single-mode FX-SC-type, "snap-in" connector
The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper
ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of
copper and Fiber functions in one module to the 6K8-Series Switches, supporting four
Copper and two single-mode (Long-Reach) fiber network segments.
The 6KP6-RJSSC, when installed in a Magnum 6K8-Series Switch has copper
supporting the 100m distances and Fiber supporting single-mode fiber cable lengths of as
much as 40+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when lit, and a
www GarrettCom com
.
.
Installation and User Guide (04/07)
6KP6-RJMSSC,
4 Port@ 10/100Mbps and 2 @100 Mb SSC Fiber Port
2
1
10/100
F/H
ACT
4
F/H
2
TX
LK
RX
1
LINK
3
ACTIVITY
53
3
5
7
LK
ACT
ACT
F/H
TX
LK
RX
6
2
10/100
4
FULL/HALF
1
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF