Gbic-Sxsc Gigabit Fiber (1000Mb) Sc Connector; Gbic-Lxsc Gigabit Fiber (1000Mb) Sc Connector - GarrettCom Magnum 6K8 Hardware Installation And User's Manual

Magnum 6K8-Series Industrial Field Switch
mentioned on 5.2.4. and the LEDs also act similarly.
5.2.12 GBIC-SXSC Gigabit fiber (1000Mb), multi-mode SC Connector
The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector
equipped with SC type connectors and can be easily snapped in and out. The Gigabit
fiber ports are most popular as server-to-switch and switch-to-switch applications. It
supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e.,
550m at full duplex.
The GBIC transceiver has been offered in the modular slot with multiple options as per
the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-
45), whereas the single Gigabit module comes in two different flavor of G+2 (100Mb
fiber ports) or G+4(10/100 RJ-45 ports) as shown in the above figure.
The GBIC transceiver is fastened using snap-in clips. Insert the transceiver
(take care to insert it the right way up, arrows on top) until it clicks in space. While
removing the transceiver, press the clips on either side of the transceiver at the same time
and pull the transceiver out.
Each port has an Activity (ACT) LED indicating packets being received and a
Link (LK) LED indicating proper connectivity with the remote device when lit.
5.2.12a GBIC-LXSC Gigabit fiber (1000Mb), multi-mode SC Connector
The Magnum GBIC-LXSC is a single-mode Gigabit fiber connector equipped
with SC type connectors and can be easily snapped in and out. The Gigabit fiber ports are
most popular as server-to-switch and switch-to-switch applications. It supports cable
distances up to the IEEE 802.3z
standard 1@ 1000Mb Fiber SC + 2@
100Mb SC
1000Mbps distance limits, i.e., 10,25, 40
www GarrettCom com . .
ACT
F/
TX LK RX
1 3
10/100
F/
1@ 1000Mb Fiber SC + 4@10/ 100Mb
60
Installation and User Guide (04/07)
5 7
L
ACT
ACT
F/
TX LK RX
ACT
ACT
F/
F/
TX L RX
TX LK RX
or