LeCroy WAVEJET 300A SERIES Manual page 58

WaveJet 300A Series
Acquisition
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
DISPLAY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
58
WSGL
Command/Query
WSGL sets the trigger mode to "SINGLE".
WSGL? also sets the trigger mode to "SINGLE", and then
waits the single measurement to be done. The WSGL? query
is used to synchronize the application program with the
completion of waveform data acquisition.
WSGL
WSGL?
+000001
WSGL/WSGL? reports device-specific error (DDE) and
does not performed when XYDS is XY.
XYDS
Command/Query
The XYDS command selects YT, XY, or XY(Triggered)
display type. The XYDS? query returns the current
display type.
XYDS <type>
<type> := {YT, XY, XYTRG}
YT := Select display type YT
XY := Select display type XY
XYTRG := Select display type XY(Triggered)
XYDS?
<type>
§ § §
917976 Rev A