LeCroy WAVEJET 300A SERIES Manual page 53

Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
917976 Rev A
WaveJet 300A Remote Control Manual
TVSET
Command/Query
The TVSET command sets field sequence, field number and
line number for TV trigger.
The TVSET query returns the currently set field
sequence, field number, and line number.
TVSET <seq>,<field>,<line>
<seq> := {1, 2, 4, 8} This specifies the field sequence
to 1, 2, 4 or 8.
<field> := 0, 1 to 8 (Specify 0 to selects "Any Fields")
<line> := 1 to 263 (When TVSTD is NTSC and <field> is
odd number)
:= 1 to 262 (When TVSTD is NTSC and <field>
is even number)
:= 1 to 313 (When TVSTD is PAL and <field> is
odd number)
:= 314 to 625 (When TVSTD is PAL and <field>
is even number)
:= 0 (Specify 0 to selects "Any Lines")
TVSET?
<seq>,<field>,<line>
TVSET command reports device-specific error (DDE) when
TTYP is not TV.
Line number selection is automatically set as follows.
NTSC：263/262
PAL：625
TVSTD
Command/Query
The TVSTD command selects the TV standard for TV trigger
(TTYP=TV).
The TVSTD? query returns the currently selected TV
standard.
TVSTD <type>
<type> := {NTSC, PAL, CUSTOM}
TVSTD?
<type>
TVSTD command reports device-specific error (DDE) when
TTYP is not TV.
53