LeCroy WAVEJET 300A SERIES Manual page 31

Math
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
Math
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
DISPLAY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
917976 Rev A
WaveJet 300A Remote Control Manual
FSRC
Command/Query
The FSRC command sets the signal source for FFT. The
FSRC? query returns the currently set signal source for
FFT.
FSRC <source>
<source>: = {CH1, CH2, CH3, CH4} (WJ354/334/324/314)
: = {CH1, CH2} (WJ352/332/322/312)
FSRC?
<source>
<source> shows the current signal source for FFT.
FSRC command/query reports Device-specific error (DDE)
when math operator is not FFT.
Use MATHS instead of FSRC to select source channels for
math operation other than FFT.
FWINDOW
Command/Query
The FWINDOW command sets the FFT window. The FWINDOW?
query returns the FFT window.
FWINDOW <type>
<type>:= {RECT, VONHANN, FLATTOP}
FWINDOW?
<type>
FWINDOW command reports device-specific error (DDE)
when MATH is not FFT.
GRAT
Command/Query
The GRAT command selects the graticule type from Grid,
Axis or Frame. The GRAT? query returns the current
graticule type.
GRAT <type>
<type> := {GRID, AXIS, FRAME}
GRID := Select grid graticule type.
AXIS := Select axis graticule type.
FRAME := Select frame graticule type.
GRAT?
<type>
31