LeCroy WAVEJET 300A SERIES Manual page 43

Horizontal
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
The TDIV command rounds the figure in <value> as follows.
Rounding range
value <= 500E-12
500E-12 < value <= 1E-9
1E-9 < value <= 2E-9
2E-9 < value <= 5E-9
: :
10 < value <= 20
20 < value
917976 Rev A
WaveJet 300A Remote Control Manual
TDIV
Command/Query
The TDIV command sets timebase. The timebase is specified
using any of the following suffixes: NS (nanosecond), US
(microsecond), MS (millisecond), or S (second). If the
specified value exceeds the allowable range, it is
rounded to a permissible value. The TDIV? query returns
the currently set timebase.
TDIV <value>
<value>:= Timebase setup parameter. The <DECIMAL NUMERIC
PROGRAM DATA> format is used, and the suffix is also
valid.
TDIV?
<value>
<value>:= The currently set timebase is identified in
<NR3 NUMERIC RESPONSE DATA> format.
Set timebase
500 ps/div
1 ns/div
2 ns/div
5 ns/div
20 s/div
50 s/div
Note
500 ps/div is available for
WJ354/352 only
1 ns/div is available for
WJ354/352/334/332
2 ns/div is available for
WJ354/352/334/332/324/322
5 ns/div is available for all models
43