LeCroy WAVEJET 300A SERIES Manual page 21

Automatic Measurement
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
Data transfer
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
917976 Rev A
WaveJet 300A Remote Control Manual
DIRM
Command/Query
The DIRM command sets the direction of automatic
measurement from A, B, C, and D.
The DIRM? query returns the currently selected
direction.
DIRM <dir>
<dir>:={A, B, C, D}
DIRM?
<dir>
The current direction status of the automatic
measurement, A, B, C, or D, is identified in <dir>.
DTBORD
Command/Query
The DTBORD command defines the order of bytes for the
WORD or DWORD waveform data transfer. (Do not affect
ASCII and BYTE data transfer.)
The DTBORD? query returns the defined byte order.
DTBORD <order>
<form>:={H/L, L/H}
H/L := transfer WORD or DWORD data in (most) upper byte
first.
L/H := transfer WORD or DWORD data in (most) lower byte
first.
DTBORD?
<order>
The byte order is identified in <form>.
21