LeCroy WAVEJET 300A SERIES Manual page 42

WaveJet 300A Series
Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
42
TCOUNT
Command/Query
The TCOUNT command defines the number of pulses for
pulse count trigger (TTYP=COUNT).
The TCOUNT? query returns the currently set number of
pulses for pulse count trigger.
TCOUNT <number>
<number> := 1 to 9999
TCOUNT?
<number>
TCOUNT command reports device-specific error (DDE) when
TTYP is not COUNT.
TCPL
Command/Query
The TCPL command defines the trigger coupling mode. The
TCPL? query returns the defined trigger coupling.
TCPL <tirg_coupling>
<trig_coupling>:={AC, DC, HF, LF}
TCPL?
<trig_coupling>
The current trigger coupling is identified in
<trig_coupling>.
When TSRC is LINE or TTYP is TV, TCPL command reports
device-specific error (DDE) and TCPL? query returns DC.
917976 Rev A