LeCroy WAVEJET 300A SERIES Manual page 45

Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
917976 Rev A
WaveJet 300A Remote Control Manual
TLVL
Command/Query
The TLVL command sets the trigger level of the channel
set by the trigger source. If a value beyond the setting
range is specified, it is rounded to the maximum or
minimum value.
The TLVL? query returns the trigger level of the channel
specified in the trigger source.
TLVL <trig_level>
<trig_level>:= The <DECIMAL NUMERIC PROGRAM DATA>
format is basically used, and the suffix is also valid.
For the setting range and rounding rules, see
"Remarks".
Note: The TLVL command can be used without the suffix,
V.
The setting range and resolution of the <trig_level>
is changed according to vertical sensitivity.
(Trigger level range) = (-5div to +5div)
(Trigger level resolution) = (1div / 50)
TLVL?
<trig_level>
<trig_level>:= The <NR3 NUMERIC RESPONSE DATA> format
is used. The currently set trigger level is input here.
When TSRC is LINE or TTYP is TV, TLVL command reports
device-specific error (DDE) and TLVL? query returns
+0.00000E+00.
45