LeCroy WAVEJET 300A SERIES Manual page 50

WaveJet 300A Series
Data transfer
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
Trigger
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
50
TSCRN?
Query
The TSCRN? query transfers the screen data in TIFF, BMP
or PNG graphic file format.
TSCRN? <type>
<type>:={TIFF, BMP, PNG}
#8<byte_length><binary_block>
• #8 shows that the response message is described in
the format of <Definite Length Arbitrary Block Response
Data> and the content of the following <byte_length>
is 8-digit data.
• The contents of <byte_length> represents the number
of bytes to be entered into <binary_block>. The byte
length is always sign-free, 8-digit integer without
suppressing the leading zero.
• The contents of <binary_block> represent the binary
data described in the specified graphic file format.
This command does not support the multi-command.
TSLP
Command/Query
The TSLP command defines the trigger slope. The TSLP?
query returns the currently defined trigger slope.
TSLP <slope>
<slope>:={POS, NEG}
TSLP?
<slope>
The currently defined trigger slope is identified in
<slope>.
917976 Rev A