LeCroy WAVEJET 300A SERIES Manual page 34

WaveJet 300A Series
MEASURE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
MEASURE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
Horizontal
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
REMARKS
34
MDSP
Command/Query
The MDSP command turns on or off parameter
measurements. When the parameter measurements are
turned on, the measurement results are displayed on the
screen and are also available for readout by MSRA?,
MSRB, MSRC? and MSRD? queries.
MDSP <function>
<function>:={ON, OFF}
MDSP?
<function>
MDSP is set to OFF when XYDS is XY or XYTRG.
MINMAX
Command/Query
The MINMAX command enables or disables Min/Max of
Measure.
The MINMAX? query reads the currently Min/Max of
Measure status.
MINMAX <function>
<function>:={ON, OFF}
MINMAX?
<function>
MLEN
Command/Query
The MLEN command sets the maximum memory length. The
MLEN? query returns the current maximum memory length.
MLEN <length>
<length>:={500, 1K, 10K, 100K, 500K} (Time/div is
20s/div or faster)
<length>:={1K, 10K, 100K, 500K} (Time/div is 50s/div)
<length>:={1K} (XYDS is XY)
MLEN?
<length>
Max memory length is fixed at 1K when XYDS is XY.
917976 Rev A