Storing Media; Loading Roll Media - Xerox 6279 Printer User Manual

Product Overview

Storing Media

The optimum environment in which to store paper media is a humidity of 40 to 45%.
Keep the following in mind when storing paper media:
• Moisture is not good for media. For storage, wrap the media in wrapping paper and
store it in a comparatively dry place. Tracing paper, especially, should be put in a
plastic or moisture-proof bag that contains desiccant.
• When the machine is not used for a long period of time, remove the media and store
it appropriately.
• The printer has a paper heater. This goes on when the system detects humidity. The
switch is located next to the waste toner bottle on the right hand side of the machine.
• Store the media on a flat surface to prevent curl.

Loading Roll Media

A Load or Change Media Type selection will display on the UI, if the Accxes Controller
detects that the required media is not loaded in the machine when it receives a print
job.
When changing the Media Type, Size or Weight, make sure you change the media
settings before printing jobs. This section also shows how to use the Media Advance
button to advance and cut the roll media.
For information about the set up procedure, refer to the
in Chapter 4, Machine Information.
1. Gently pull out the Media Drawer 1 for Rolls 1 and 2 media.
Or pull out Media Drawer 2 (optional) if it is present on your machine and requires
media.
1-22
Media Status and Setup
® ®
Xerox 6279 Wide Format Solution
Printer User Guide
section