Copy Output - Xerox DocuColor 12 User Manual

Copy Output

The Copy Output feature enables you to select the
destination of the output and determine whether it
is to be collated or uncollated. For example, three
copies of a three-page collated job will result in
three sets of copies in 1, 2, 3 order. Three copies
of a three-page uncollated job will result in output
in the order 1, 1, 1, 2, 2, 2, 3, 3, 3.
If the DocuColor 12 does not have a Sorter/
Mailbox, only one output tray is listed, as
illustrated in Figure 9. No other option is available.
If the DocuColor 12 has a Sorter/Mailbox, output
may be directed to the Sorter/Mailbox Bins or
Offset Catch Tray. Use the following procedure to
make your choice.
On the Basic Copying tab, touch the appropriate
Copy Output option, as illustrated in Figure 10:
•
Touch Auto Output to direct collated output to
the Offset Catch Tray.
•
Touch Collated to direct up to 10 sets of
collated output to the Sorter/Mailbox Bins.
•
Touch Uncollated to direct uncollated output
to the Sorter/Mailbox Bins.
If the job has more than 10 original
documents, production will pause after the
tenth set has been delivered until you clear
the bins of all output and press Start.
DOCUCOLOR 12 USER GUIDE
without optional Sorter/Mailbox
Figure 10: Copy Output options
with optional Sorter/Mailbox
4–7
Figure 9: Copy Output
BASIC COPYING
1
2
3
4
5
6
7