Edge Erase - Xerox DocuColor 12 User Manual

Edge Erase

The Edge Erase feature (Figure 27) enables you
to eliminate unwanted marks near the edges of
the original from the output copy.
This feature offers two options:
•
No Erase
•
Variable Erase
When you are making 2-sided copies, edge erase
is applied to both sides of the output.
KEY POINT: Edge Erase varies according to the
reduction/enlargement ratio that you set. For
example, when a reduction of 50% combined with
an edge erase width of 30 mm results in a 15 mm
edge erase.
In order for the Edge Erase feature to function
correctly, the original must be registered on the
Document Glass against the registration arrow.
After you select an Edge Erase option, the Added
Features screen displays a check in the feature
check box beside the set values.
NOTE: The System Administrator sets a default
Edge Erase. The output reflects the greater of the
two values. For example, if the default Edge Erase
value is 3 mm and you request an edge erase of 2
mm, the output copy reflects the default value. If
you request an edge erase of 5 mm, the output
copy uses a 5 mm edge erase.
DOCUCOLOR 12 USER GUIDE
Figure 27: Edge Erase feature
5–25
1
2
3
4
5
6
7
ADDED FEATURES