Auto Tray Switching - Xerox DocuColor 12 User Manual

Auto Tray Switching

The Auto Tray Switching option enables the
copier/printer to switch automatically to another
tray when a tray runs out of paper, providing that
the trays are loaded with the same size paper in
the same orientation (long edge feed or short
edge feed).
You can reload paper in empty trays while the
copier/printer is running to ensure continuous
production.
Auto Tray Switching is enabled in the Tools mode
only for Paper Trays 1, 2, 3 and 4. Tray 5 can not
be enabled for Auto Tray Switching.
The factory default for Auto Tray Switching is ON
with Paper Trays 1, 2, 3, and 4 enabled.
To use Auto Tray Switching with the factory default
settings, load the trays you want to use with the
same size paper in the same orientation.
For example, if you load trays 2 and 3 with the
same size paper in the same orientation, select
the Tray 2 paper supply button on the Touch
Screen. The copier/printer draws paper from Tray
2 until it is depleted, then switches automatically
to Tray 3.
DOCUCOLOR 12 USER GUIDE 4–17
1
2
3
4
5
6
7
BASIC COPYING