Xerox DocuColor 12 User Manual page 70

13
Perform one of the following:
1
•
2
3
•
14
Press the Start button.
4
15
When copying is completed, perform the
following:
•
•
5
•
6
7
MAKING COPIES
Raise the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover
and place the document, face down, on the
Document Glass, as in Figure 20.
Ensure that the document lies against the reg-
istration area at the left rear corner of the
glass. The Registration area is identified with
an arrow.
Lower the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover.
If you have a Duplex Automatic Document
Feeder, place the document face up into the
DADF Tray, as in Figure 21. The Document
Feed Lamp lights when the document is in the
correct position. Ensure that the paper guide
is against the original document.
Remove the copies from the Output Tray or
Sorter/Mailbox on the right side of the copier/
printer.
Remove the original document(s) from the
Document Glass or Original Catch Tray of the
DADF.
If you used Paper Tray 5, remove the copy
stock from Tray 5 and store it properly.
Figure 20: Placing a document on the
Document Feed Lamp
Figure 21: Placing a document in the
3–12
Document Glass
DADF Feeder Tray
DOCUCOLOR 12 USER GUIDE