Xerox DocuColor 12 User Manual page 219

If the paper jam is in the Fuser Exit area, locate
the Fuser Exit Area handle at the right of the
Paper Path Module, as illustrated in Figure 11.
Move the handle to the right and carefully remove
the jammed paper. Gently secure the handle back
into place.
6
In the Duplex Path, areas 3 and 4, press the
handles down gently to release the Aligner Baffle
(left handle) and Duplex In baffle (right handle), as
illustrated in Figure 13.
7
Remove the jammed paper and secure the
handles back in place.
8
Firmly push in the Paper Path Module until it is in
place. Turn the green handle anti-clockwise to
lock the module, as illustrated in Figure 14.
DOCUCOLOR 12 USER GUIDE
Figure 12: Fuser Exit area
Area 3
Area 4
Figure 13: Duplex Path Areas
Figure 14: Rotating the green handle anti-
12–9
clockwise
PROBLEM SOLVING
1
2
3
4
12
6
7