Transmission Control Mode Selection - Toshiba B-570 SERIES Owner's Manual

6. DIAG. TEST OPERATION

6.3.17 Transmission Control Mode Selection

< 1
< 2
D T
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enable.
2. A changed Transmission Control Mode is memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
> D I A G N O S T
Press the [FEED] key.
> P A R A M E T E
Press the [PAUSE] key 19 times.
R / R T S
Select the Transmission Control
Mode with the [FEED] key
or [RESTART] key.
Press the [FEED] key and
[RESTART] key at the
same time.
I C . V 1 . O A
R S E T
D T R
¥ DTR: READY/BUSY (DTR) protocol
¥ RTS: READY/BUSY (RTS) protocol
Press the [PAUSE] key.
Continued on Section 6.3.18
Reset Selection when the
INPUT ¥ PRIME Signal is ON.
6-39
(Revision Date: Dec. 10 '99)
6.3 PARAMETER SETTING MODE
(DTR/DSR)
(RTS/CTS)
EM18-33010A