Chapter 2 Installing The Cisco Mds 9216 Switch - Cisco MDS 9216 Hardware Installation Manual

Send documentation comments to mdsfeedback-doc@cisco.com.
Installing the Cisco MDS 9216 Switch
This chapter describes how to install the Cisco MDS 9216 Switch and its
components, and includes the following information:
•
•
•
•
•
Before you install, operate, or service the system, read the Regulatory
Note
Compliance and Safety Information for the Cisco MDS 9000 Family for important
safety information.
IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
78-16165-01
Pre-Installation, page 2-2
Installing the Chassis in the Rack, page 2-7
Grounding the Chassis, page 2-15
Starting Up the Switch, page 2-17
Removing and Installing Components, page 2-21
C H A P T E R
Cisco MDS 9216 Switch Hardware Installation Guide
2
2-1