Cisco MDS 9216 Hardware Installation Manual page 62

Installing the Chassis in the Rack
Send documentation comments to mdsfeedback-doc@cisco.com.
Figure 2-4
1 Mounting rail
2 L bracket
From the back of the rack, position the longer slider rails with the ears away from
Step 4
the chassis and slide them into the C brackets previously installed on the sides of
the chassis (see
Step 5 Level the chassis (it may sag slightly towards the back) and attach the slider rails
to the mounting rails with the 12-24 x 3/4-inch or 10-32 x 3/4-inch screws, three
per side.
Cisco MDS 9216 Switch Hardware Installation Guide
2-12
Installing the Cisco MDS 9216 Switch in the Rack
1
M D
S
9 2
1 6
3
Figure 2-5).
Chapter 2
2
3 Screws, 12-24 or 10-32
Installing the Cisco MDS 9216 Switch
78-16165-01