SFP Transceiver Specifications
Send documentation comments to mdsfeedback-doc@cisco.com.
Optical Specifications for Cisco CWDM SFP Transceivers
Note
Note
Cisco MDS 9216 Switch Hardware Installation Guide
C-14
Table C-16
provides the electrical specifications for CWDM SFP transceivers.
Table C-16 Electrical Specifications for Cisco CWDM SFP Transceivers
Parameter
Symbol
Supply
|
s
Current
Surge Current |
surge
Input voltage
Vmax
Table C-17
provides the optical specifications for CWDM SFP transceivers.
CWDM SFP transceivers have an optical link budget of 28 decibels (db).
The parameters are specified over temperature and at end of life unless otherwise
noted.
When shorter distances of single-mode fiber are used, it might be necessary to
insert an in-line optical attenuator in the link to avoid overloading the receiver.
Appendix C
Minimum
Typical
220
3.1
3.3
Cable and Port Specifications
Maximum
Units
300
mA
+30
mA
3.6
V
78-16165-01